8618820534104
lomen@jeepine.com.cn
ilבחר
חיפוש
Advanced Search

Plastic Cap Mould

הבית / מוצרים / Plastic Cap Mould

 

Established in 2008,Guangzhou Jeepine Intelligent Compression Molding Machine Co., Ltd is one of the leading manufacturer of The High-compacity Cap Compression Molding Machine ,dedicated to High-efficiency and cost-saving compressing molding technology.especially for the bottled water cap compression molding,beverage cap moulding,dairy cap molding,liquor cap molding,condiment cap molding,cosmetics closure molding and pharmaceutical rotary closure molding machine. Jeepine are leading the advanced compression technology for plastic closures in China,with the aim of creating value for customers.

 

One-stop Solution

 

 

Established in 2008, We have more than 10 years rich experiences in cap compression molding machine. Up to now,We're obtained nearly 100 national patents,in science&Technology"and has winned the certifications of UL,ISO9001 :2015 and TUV.

24H Online Service

You can contact us about pre-sale, in-sale and after-sale services, we will give you a very satisfactory answer, and we serve you online 24 hours a day.

Compression Moulding Machines

 

 

 

Multi-cavity point
Plastic bottle cap molds have mature technology from 4 to 32 cavities, simplified hot runner work, and low cost.

 


The plastic bottle cap mold adopts a simplified dispensing hot runner, no glue mouth waste, and the cycle reaches 5 seconds.

 


The cavity of the plastic bottle cap mold is made of high-quality mold steel, and the guide post and guide sleeve of the mold are lubricated without oil, which has the strong advantages of no pollution and a service life of up to ten million times.

 


Continuous Compression Moulding

 

 




For plastic bottle cap production, you will need to use the extrusion mechanism, as this is the mechanism that works best to produce tube-shaped products. With the extrusion mechanism, you can create plastic bottle caps that will have the best design, along with the threading system inside the cap.

The cooling process of the injection-molded plastics
Now, the extrusion process will be complete, and the injection-molded bottle caps will need to cool down before you can eject them from the mold. Depending on various factors, you will need to wait for different cool-down times for the plastic bottle caps.


Now, it's time to remove the injection-molded caps from the mold cavities. The mold will be able to handle thousands of production cycles, so you can repeat the process again as needed.

 
 
01/


02/


03/


04/


 

201910151452351192285

 

 

A: Class 103 – These molds are built for a maximum lifespan of 500,000 cycles – medium production volume. The mold base must be a minimum hardness of 8 Rc, and the cavity and cored must have a minimum hardness of 28 Rc. Class 104 – These molds are built to not exceed 100,000 cycles – low production mold.

A: Plastic moulding is the process of pouring liquid plastic into a certain container or mould so that it hardens in that customized shape. These plastic moulds can then be used for a wide range of purposed. There are 5 types of plastic moulding that is considered to be the most effective and most popular.

A: The bottle cap has the function of keeping the contents of the product airtight, and also has the functions of anti-theft opening and safety, so it is widely used in daily chemical, food, beverage, wine, chemical, and pharmaceutical bottled products!

A: Compression molding is a high-pressure molding process: the polymer is melted, mixed and homogenized inside a plasticizing unit. A device draws doses of polymer that have the exact same weight as the product and inserts them into the molds. The pressure applied to each mold can be as high as 400 kg/cm2.

A: Transfer moulding is similar to compression moulding except that instead of the moulding material being pressurized in the cavity, it is pressurized in a separate chamber and then forced through an opening and into a closed mould. Transfer moulds usually have multi-cavities as shown in Fig. 4.76.

A: Compression molding is a relatively simple process involving pressing or squeezing a deformable material charge between two halves of a heated mold and its subsequent transformation into a molded part after cooling or curing. The equipment typically involves a large tonnage press (150 tons–2500 tons) and heated dies.

A: The compression moulding process is one of the non-conventional processes in plastic engineering sector. The process is most suitable for low melt flow thermosets. The parts can possess great surface finish and strength with less warpage.

A: Low cost - Due to its simplicity, compression molding is very cost-effective when compared to other techniques. Little waste - Little material is lost during the molding process. For example, it does not use gates, sprues or runners, tooling features required by other production methods that result in greater waste.

We're well-known as one of the leading plastic cap mould manufacturers and suppliers in China for our quality products and customized service. Please feel free to buy bulk plastic cap mould made in China here from our factory.